The Dometic 300 Weekender RV Toilet part # DOM64FR that you referenced does come with a base seal so you would not need to provide that separately. No additional components are needed to install this. view full answer...
According to my research your 2016 Keystone Passport 151ML has a 3,500 lb axle which means you need the 3.5K Electric Trailer Brake Kit # AKEBRK-35-SA to replace your brakes.
I'm linking an installation video for you to reference as well. view full answer...
Yes the width of the crossmember on the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs # UF39-941705 will give you more surface contact on the frame of your 2015 Keystone Passport Ultra Lite Travel Trailer. This will reduce some stress by spreading the weight of the trailer out more.
To keep this upgrade to your Passport Ultra Lite as light as possible I recommend the Lippert High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift # LC369774.... view full answer...
A 205/75-15 tire is what I'd recommend. The tire would be 1 inch taller in diameter which would raise the ride height by 1/2 inch, and the tire would be about the same width as your existing tire, which is 8 inches. .
If a Load Range D tire with a 2150 lb per tire/4300 lb per axle capacity would work for you, I'd recommend the Taskmaster Provider tire, part # TR20515D.
You can see a product description video by using the provided link. view full answer...
The Dexter Electric Trailer Brake Kit # 23-26-27 contains both the left and right hand brake assemblies that replace your 36-19 assemblies on your 2017 Keystone Passport.
Yes, you can replace them with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469, which I recommend for the ease of maintenance as well as the improved braking. Since these are self adjusting that means that you have more consistent braking as the pads wear and you will not have to constantly adjust your... view full answer...
The MORryde StepAbove RV Steps with Strut Assist, # MR45RR is for trailers with a doorway width of 23-3/4" to 24-1/4". This is a 3 step version for entry door heights of 31-1/2" - 37-1/2". view full answer...
For your 2016 Keystone Passport Ultra lite Express 151ML I recommend the Curt Adjustable Trailer Hitch Receiver # C13701 which is designed to fit Box frames, C-Channel frames, or I-Beam frames that are between 18" - 51" wide and can be bolted on or welded on.
This will give you a 2" trailer hitch receiver with a 500lb tongue weight rating, and 5000lb trailer weight rating allowing you to carry a bike rack. You will want to check with the manufacturer of your trailer to confirm the weight... view full answer...
Yes, we have a few sizes for your Ventline Ventadome Trailer Roof Vent # V2092SP-25 depending on your needs:
Ceiling Garnish for Ventline Roof Vent - 2-1/8" Leg # VA0445-26.
Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg # VA0445-27.
Ceiling Garnish for Ventline Roof Vent - 4-1/8" Leg # VA0445-36.
Ceiling Garnish for Ventline Roof Vent - 4-1/4" Leg # VA0445-28.
Ceiling Garnish for Ventline Roof Vent - 5-1/8" Leg # VA0445-29.
Ceiling Garnish for Ventline Roof Vent - 5-5/16" Leg... view full answer...
We can help. We have the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option, # 295-000183. This fits into the same cut out as most travel trailer locks, which is approximately 3-3/4" tall x 2-3/4" wide. The dual locks let you lock only the exterior handle, or both the exterior handle and keypad while the interior handle remains unlocked for emergency exit. The Lithium battery is included and this has ability to be keyed alike to match other Global Link locks.
If... view full answer...
You are correct, Kenda Karrier # 10235 is rated for 75 PSI. It is always recommended to inflate trailer tires to max psi because it extends their life, cuts down on wear and allows them to be used at the maximum weight capacity.
You should inflate your tires to this max psi of 75 when cold, they have already accounted for heat build up. view full answer...
The # K71-359-00 is most likely the best choice to go with since it's a very universal and also well made design but it really depends on the equalizer size you have now. This one measures 5-3/4 inches from left to right hole centers and then is 2 inches tall. This is a very common design so I'd be surprised if you needed something else but you should check to be sure. view full answer...
The correct replacement cover for your Dometic Duo Therm, model 57915.351 is the Replacement RV Air Conditioner Cover for Dometic Duo-Therm # DMC69FR. This cover measures 40-1/2" long, 29" wide, and 7" tall. view full answer...
It sounds like you have an issue with your Breakaway Kit # 20099. This is where the power is coming from to lock your trailer brakes when it is not connected to your vehicle 7-way. You will want to check to ensure the disconnect is fully seated and the wiring for it is not damaged. We do have a Replacement Switch # FA80-00-2040 if your switch is allowing power to flow through the switch with the plug in place. view full answer...
Yes, I confirmed with my contact at Camco that the Camco RV Refrigerator Vent Cover # CAM42163 will fit your Atwood/Dometic Ultra Lite refrigerator. view full answer...
With the dimensions you provided you should be able to install the Greystone Standard RV Microwave w/ Trim Kit - 1,350 Watts - 0.9 Cu Ft - Stainless Steel Item # 324-000106 with the trim as long as you place it to as far to the bottom left corner of the cutout as possible. I've attached a picture of the trim measurements for you as well. view full answer...
The Replacement Head Pin # LC266141 is for a plain Solera awning system while the Replacement Head Pin # LC93FR fits the Regal Style Solera awning system.
I'm not sure what Solera awning you have on your 2016 Keystone Passport Ultra Lite 2920BH but if you can confirm what style you have it will help you know which replacement pin you need. If neither of these pins match what you have please let me know and I'll let you know if we have a different part for your application. view full answer...
We do not have a lock that fits the 3.5" x 5.5" cutout of your current lock. We have a couple options that are slightly smaller or larger.
Smaller:
- Global Link RV Entry Door Locking Latch Kit # 295-000019 (cutout of 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall)
Larger:
- Bauer Products Motorhome Door Lock # BA64FR (cutout of 5-1/4" wide x 4-1/2" tall) you may be able to expand your cutout enough to make this option work. view full answer...
The Equa-Flex Cushioned Equalizers part # LC314336 will work with any standard 9/16" should bolt. The Lippert Components Tandem Axle Equa-Flex AP Kit part # LC64FR would be a great option to use since it uses wet bolts and comes with shackle straps as well.
I have attached a review video I did on the Equa-Flex. view full answer...
I spoke with Curt and was told to not even bother using the weigh distribution setup application of the BetterWeigh Mobile Tongue Weight and Payload Scale for OBD II # C51701 since it's not usually the most accurate and to just follow the instructions for the weight distribution hitch instead. That's obviously not the kind of support I would hope for from the manufacturer so I recommend recalibrating your system to see if that gives you new target bars in-app. If not, then you would need... view full answer...
I have found the Mighty Cord Replacement Pigtail # A10-30PMVP to be the best option when replacing a power cable end on a camper using a Hatch # A10-2140VP to store the cable. The replacement ends like the Hughes # HU93FR you found are too large to fit in the small storage area.
Personally the best thing you can do is eliminate this type of cord all together by installing the Power Inlet # A10-30INVP in its place. This helps to seal one of the holes which insects and moisture can easily... view full answer...